| Customization: | Available |
|---|---|
| Max Diameter of Workpiece: | 500mm |
| Mass Scope of Workpiece: | <900kg |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Main application:
u Applicable for tensile test of metal rods and plates, deformed steel bars, as well as high strength and high hardness metal materials.
u In accordance with the standards of GB/T228.1-2010 Metallic Materials - Tensile Testing Method at Ambient Temperature
u GB/T5224-1995 Standard of Pre-stressed Steel Strand -Requirements for Tensile Test of Steel Strand
System features:
u Adopt single-space structure with overhead hydro-cylinder, where all tests are completed in the same space.
u The main machine is of fully-rigid gapless structure, therefore the testing machine may cause small impact on the ground after fracture during the tensile test.
u The testing machine has high coaxiality. Therefore, no additional resistance will act on the force transducer when testing and the test results are more accurate.
u Adopt imported famous brand of load sensor, which is of high precision, good linearity, and good stability.
u Use pull type photoelectric encoder for displacement measurement, which is of high precision and strong impact resistance.
u Professional modular TensonTest test software, which can meet the test requirements of international, China's national, and industry standards.
u The control system adopts all digital DSP controller, and Neuron self-adaptive PID algorithm, so as to achieve three "closed-loop" control of force, deformation, and displacement.
u Applicable for tensile test of metal rods and plates, deformed steel bars, as well as high strength and high hardness metal materials.
u In accordance with the standards of GB/T228.1-2010 Metallic Materials - Tensile Testing Method at Ambient Temperature
GB/T5224-1995 Standard of Pre-stressed Steel Strand -Requirements for Tensile Test of Steel StrandTechnical parameters:| Model | WAW-600L | WAW-1000L | WAW-2000L | WAW-600LT | WAW-1000LT | WAW-2000LT |
| Clamping way | Wedge clamping | |||||
| Maximum test force (KN) | 600 | 1000 | 2000 | 600 | 1000 | 2000 |
| Accuracy level | Grade 0.5/ Grade 1 | |||||
| Measuring range of test force | 1%-100%FS (full scale, at all shifts) | |||||
| Relative error in the indicating value of test force | Within ±0. 5%/±1% | |||||
| Deformation (extensometer) measurement range | 1%-100%FS | |||||
| Relative error of deformation indication value | Within ±0. 5%/±1% | |||||
| Resolving power of deformation | 1/500000 of the maximum test force | |||||
| Test force loading rate range | 0. 02%-2%FS/s | |||||
| Piston rising speed range | 0-190mm/min | 0-180mm/min | 0-90mm/min | 0-350mm/min | 0-350mm/min | 0-300mm/min |
| Piston falling speed range | 0-240 mm/min | 0-290mm/min | 0-100 mm/min | 0-200 mm/min | 0-550mm/min | 0-600mm/min |
| Piston stroke (mm) | 560 | 650 | 780 | 560 | 650 | 750 |
| Structure of the main machine | 4 | |||||
| Effective distance between columns (mm) | 660X350 | 660X400 | 800X450 | / | / | / |
| Max. stretching distance of vice (mm) | 580 | 700 | 800 | 600 | 680 | 800 |
| Max. compression space (mm) | 450 | 550 | 580 | 460 | 520 | 520 |
| Clamping range of round specimen (mm) | Φ10-Φ18, Φ18-Φ29, Φ29-Φ40 | Φ15-Φ30, Φ30-Φ45, Φ45-Φ55 | Φ15-Φ30, Φ30-Φ55, Φ55-Φ70 | Φ10-Φ20, Φ20-Φ25 | Φ15-Φ30, Φ30-Φ60 | Φ15-Φ40, Φ40-Φ100 |
| Clamping range of flat specimen (mm) | 2-16, 16-30 | 2-20, 20-40 | 10-40, 40-70 | 2-45 | 2-60 | 2-80 |
| Pressing plate size (mm) | Φ150 | 200x200 | Φ200 | 140x140 | 200x200 | φ300 |
| External dimension of the main machine (mm) | 880X630X2980 | 980X720X3590 | 1220X880X4100 | 860X400X2900 | 980X720X3590 | 220X880X420 |
| External dimension of oil tank (mm) | 1150X600X900 | |||||
| Power supply | Three-phase five-wire system (380V, 50HZ) | |||||
| Weight (kg) | About 3500 | 6500 approx. | 9200 approx. | 2500 approx. | 6800 approx. | 10000 approx. |
){kind=link}